What should I do if my toilet won't flush but is not clogged?

If the toilet won’t flush and the bowl isn’t clogged, the issue is usually in the tank or water supply. Check the handle linkage, make sure the chain isn’t too loose or tight, confirm the flapper seals, verify the water level is near the fill line, and ensure the shutoff valve is fully open. If parts are worn, we can replace the fill valve, flapper, or handle. We provide same-day and emergency service in Tulsa and Jenks, with free estimates and financing options.

Quick checks:

• Open the tank lid and inspect the chain and flapper.
• Turn the water supply valve fully on.
• Adjust the float to raise water level.
• Listen for constant running (failed fill valve).

Updated: 2026-01-27 00:00:00

Need help in Jenks, OK? Call (918) 612-7635 or book online.